KEY FEATURES
- 1.5” Top mount control valve suited for commercial/industrial applications
- Epoxy coated lead free brass valve body
- Economical stainless steel optional meter assembly
- Service flow rate of 265 lpm (15.9 m3/h) (70 gpm),backwash 197 lpm (11.8 m3/h) (52 gpm)
- Solid state microprocessor with easy access front panel settings
- Front panel display for time of day, days until next regeneration, volume remaining and current flow rate
- Four methods to initiate regeneration; meter immediate, meter delayed, time clock delayed or pressure differential
- Program in ppm, French degrees, German degrees, or cubic meters
- Fully programmable regeneration cycle sequence (maximum 9)
- Programmable regeneration cycle times
- Days override feature; 1 – 28 days available
- Coin Cell Lithium battery back-up with an 24 hour carry over
- Level VI 15-volt output DC power supply provides safe and easy installation
- Pre or Post treated water regenerant refill
- 24-hour clock
- Reliable and proven DC drive
- One piece expanding seal spacer stack assembly
- Linearly reciprocating piston operation
SPECIFICATION
Specifications
FLOW RATES
Service @ 15 psi/1 bar drop (includes bypass and meter) – 265 lpm (15.9 m3/h) (70 gpm)
Backwash @ 25 psi/1.7 bar drop – 197 lpm (11.8 m3/h) (52 gpm)
OPERATING PRESSURES
Minimum/Maximum: 20 – 125 psi (1.4 – 8.6 bar)
OPERATING TEMPERATURES
Minimum/Maximum: 40º – 110º F (4º – 43º C)
METER
Accuracy: ± 5%
Flow Rate Range: 2 – 284 lpm (0.5 – 75 gpm)
Volume Range: 0.02 – 5,700 m3
Totalizer: 1 m3 – 99,999 m3
DIMENSIONS & WEIGHT
Distributor Pilot
Valve bodies with 1.5″ Female BSPT Inlet & Outlet – 50 mm OD
Valve bodies with 1.5″ Female NPT Inlet & Outlet – 1.90” OD (1.5″ NPS)
Drain Line Connection(2) – 1.25” Female NPT
Adapter Included – 3⁄4″ Male NPT Elbow
Brine Line Connection – ¾” Female NPT
Adapter Included – ½” OD Poly Tube Compression
Mounting Base – 4″ – 8 UN
Height From Top Of Tank – 191 mm (7.5”)
Weight – 21 lbs (9.5 kg)
| ELECTRICAL SPECIFICATIONS | POWER SUPPLY | |
| U.S. | International | |
| Supply Voltage | 100VAC to 120VAC | 200VAC to 240VAC |
| Supply Frequency | 50/60 Hz | 50/60 Hz |
| Output Voltage | 15VDC | 15VDC |
| Output Current | 500 mA | 500 mA |
TANK APPLICATIONS
Water Softener: 6″ – 24″ Diameter
Water Filter (2): 6″ – 30″ Diameter
CYCLES OF OPERATION
Choose up to nine regeneration cycles, in any order, with a wide range of available values:
Backwash: 1 – 120 minutes
Rinse: 1 – 120 minutes
Pause (service): 1 – 480 minutes
Brine (co-current): 1 – 180 minutes
Brine (counter-current): 1 – 180 minutes
Refill (softener): 0.05 – 90.00 Kg
Refill (filter): 0.2 – 76.00 Liters / .1 – 99 minutes
Options: Backwash Filter, Bypass, Weather Cover
Compatible with the following typical concentrations of regenerants or chemicals: Sodium chloride, potassiumchloride, potassium permanganate, sodium bisulfite, chlorine and chloramines
(1) See Distributor Pilot.
(2) Casting comes with a 1.25″ Female NPT drain connection. An adapter is provided to accept existing WS1 drain line 3⁄4″ Male NPT flow controls up to 38 lpm (10 gpm). Other drain line flow controls are available for flow rates above 38 lpm (10 gpm).
(3) Filter tank size calculated @ 407 lpm per m2 of bed area/10 gpm of backwash per square foot of bed are
